D-Link 10-port 10/100/1000Base-T Long Range 250m PoE+ Smart Switch with 8 PoE ports, 2 SFP ports, 96W PoE

EGP

SKU: DGS-F1100-10PS-E

SHARE:

Share on facebook
Share on twitter
Share on linkedin
SKU DGS-F1100-10PS-E categories: , , Tags: , ,

Description

DGS-F1100-10PS-E
PoE Gigabit ManagedSwitch
Features
Physical
• Available in multiple configurations,
with or without PoE and fiber support
• Fanless design for silent operation
• 6kv Surge Protection
• 8x 10/100/100 BASE-T PoE Ports
(802.3af/at complaint)
• 2 Gigabit SFP Ports
Management Features
• Client-based utility or web-based GUI
• Built-in SNMP MIB
Advanced Features
• IEEE 802.1Q and port based VLAN
• IEEE 802.1p Quality of Service (QoS)
• STP/RSTP/MSTP
• Port mirroring
• Link aggregation
• Bandwidth control
• Broadcast storm control
• IGMP/MLD Snooping
• Extend mode transmission distance up
to 250m
• 96W PoE Budget
About the Switch
DGS-F1100-10PS-E is a managed switch designed to meet the requirements of
small, medium, and enterprise businesses. DGS-F1100-10PS-E supports multiple PoE
standards make it ideal for IP surveillance deployments. Advanced management
features, a range of diagnostic and troubleshooting tools, and energy efficient
technologies provide a flexible solution to meet your networking requirements.
Advanced Features
The DGS-F1100-10PS-E is equipped with advanced security features such as Static MAC, Storm
Control, and IGMP Snooping. Static MAC allows users to create a MAC whitelist for specific ports,
helping administrators limit network access to authorized devices only. Storm Control monitors
broadcast, multicast, or unknown unicast traffic and will start blocking or discarding packets which
could flood the network when the defined threshold is exceeded. IGMP Snooping can reduce the
load of L3 multicast routers and save bandwidth in network throughput The IEEE 802.3x Flow
Control function allows servers to directly connect to the switch for fast, reliable data transfers.
The switch also supports advanced features such as static routes, which allow network
administrators to divide the network into VLANs, increasing network efficiency. The DGS-F1100-
10PS-E supports Voice VLAN and Port VLAN, allows voice and video traffic to be automatically
identified and handled differently than regular network traffic, adding a layer of isolation and
allowing Quality of Service (QoS) to be applied.
PoE Support
The DGS-F1100-10PS-E provides Power over Ethernet (PoE) support, reducing deployment time
for IP cameras, VoIP phones, and access points. Dedicated power adapters are no longer
required, as the DGS-F1100-10PS-E comply with IEEE 802.3af and 802.3at PoE standards and
provide up to 30 watts per port.

 

Tags: , ,

Reviews

There are no reviews yet.

Be the first to review “D-Link 10-port 10/100/1000Base-T Long Range 250m PoE+ Smart Switch with 8 PoE ports, 2 SFP ports, 96W PoE”

Your email address will not be published. Required fields are marked *

x